Available Options
Options for: Motor Starters & Pump Panels
| Description | Option Code |
|---|---|
| Control Circuit Transformer With Primary & Secondary Protective Fuses | |
| 208/240/480 – 120V @ 50VA | CT50 |
| 208/240/480 – 120V @ 100VA | CT100 |
| 208/240/480 – 120V @ 150VA | CT150 |
| 208/240/480 – 120V @ 250VA | CT250 |
| 208/240/480 – 120V @ 500VA | CT500 |
| Interposing Relay For separate control voltage input ( ** Specify required Voltage when ordering) | IR-** |
| Time Delay Relay ( ** Specify required function when Ordering) Note: This option requires a control circuit transformer | TD-** |
| Programmable Time Clock 24 Hour, 7 Day function Note: This option requires a control circuit transformer | TC |
| Liquid Level Relay ( ** Specify required function when ordering) Note: This option requires a control circuit transformer | LLR-** |
| Indicating Light Specify Function and Lens color when ordering (ie: run/red) | PL-** |
| Electronic Programmable Overload Relay Protects 3 Phase Motors against: Overload, Underload, High Voltage, Low Voltage, Loss of Phase, Phase Reversal, Phase & Voltage, Unbal-ance, Rapid Cycling, and Ground Fault | |
| Motor Full Load Amps: 2 – 90 Amps | DEOL |
| Motor Full Load Amps: 91 – 600 Amps (includes current transformers) | CTEOL |
| Phase & Voltage Monitor Protects Three Phase motors against: High Voltage, Low Voltage, Phase Reversal, Loss of Phase, and Unbalance | PMR |
| Secondary Surge Arrester Offers a degree of protection against damage due to lightning strikes | LA |
| Surge Capacitor Controls surges which are too light or fast for a surge arrester | SC |
| Low Suction Cut-Off Option includes a Terminal Block for remote pressure switch, a Red Indicating Light, and a Timing Relay to prevent nuisance tripping Note: This option requires a Control Circuit Transformer | LSC |
| High Pressure Shutdown Option includes a Terminal Block for remote pressure switch, a Red Indicating Light, and manual Reset Pushbutton Note: This option requires a Control Circuit Transformer | HPS |
| Elapsed Hour Meter Records motor running time in Hours, Non Reset, 99999.9 Hours Note: This option requires a control circuit transformer | ETM |
| NEMA Type 4 Steel Enclosure Water & Dust-Tight, Outdoors | N4 |
| NEMA Type 4X Stainless Steel Enclosure Water & Dust-Tight, Outdoors, Corrosion-Resistant | N4XS |
| NEMA Type 4X Fiberglass-Reinforced Polyester Enclosure Water & Dust-Tight, Outdoors, Corrosion-Resistant | N4XF |
| Starter Auxiliary Contacts 1 N/O & 1N/C contacts interlocked with starter | AUX |
Options for: Duplex Booster
| Description | Option Code |
|---|---|
| Low Suction Cut-Off Option includes a terminal block for remote pressure switch, a Red In-dicating Light, and a Timing Relay | LSC |
| Low Pressure Alarm Option includes a terminal block for remote pressure switch, a Red In-dicating Light, and a Timing Relay | LSP |
| High Pressure Shutdown Option includes a terminal block for remote pressure switch, a Red In-dicating Light, and manual Reset Pushbutton | HPS |
| Interposing Relay For use with separate control voltage ( ** Indicate required Voltage when ordering) | IR-** |
| Time Delay Relay ( ** Indicate required function when Ordering) | TD-** |
| Programmable Time Clock 24 Hour, 7 Day function | TC |
| Elapsed Hour Meter 99999.9 Hours, Non Reset Quantity Two | ETM |
| Cycle Counter 6 Digits, Non Reset Quantity Two | CC |
| Indicating Light ( ** Indicate Lens color and Function when ordering) | PL-** |
| Phase & Voltage Monitor Protects 3-Phase motors against: High Voltage, Low Voltage, Phase Reversal, Loss of Phase, and Unbalance | PMR |
| Surge/Lightning Arrester | LA |
| Surge Capacitor | SC |
| Starter Auxiliary Contacts Option includes 1-N.O. & 1-N.C. Auxiliary Dry or Powered Contacts for interfacing with remote loads or monitoring Quantity Two Sets (one per starter) | AUX |
| Electronic Programmable Overload Relay, Motor Saver 777 Protects 3-Phase Motors against: Overload, Underload, High Voltage, Low Voltage, Loss of Phase, Phase Reversal, Phase & Voltage Unbal-ance, Rapid Cycling, and Ground Fault Quantity Two
| DEOL |
| External Electric Reset Pushbutton for Motor Saver 777 Quantity Two | EOLR |
| Deduct for Auto Duplex Alternator | NALT |
| Terminal Block 3P, 600V, 30 AMPS (Specify Function) | TB |
Options for: Duplex Lift Station
| Description | Option Code |
|---|---|
| Dead-front Enclosure Construction Tamper-proof design with Swing-out inner door and Lockable outer door | A |
| NEMA/UL Type 4 Enclosure Steel, Water & Dust-Tight, Indoor/Outdoor use | B |
| NEMA/UL Type 4X Fiberglass-Reinforced Polyester, Water & Dust-Tight, Indoor/Outdoor use, Corrosion-Resistant | C |
| NEMA/UL Type 4X 304 Stainless Steel, Water & Dust-Tight, Indoor/Outdoor, Corrosion-Resistant | D |
| Anti-Condensation Cabinet Heater 100 Watt, Fan-Driven, with integral adjustable thermostat | E |
| Elapsed Hour Meters (2) 99999.9 Hours, Non-Reset, door mounted | F |
| Pump Running Indicating Lights (2) Green Lens, door mounted | G |
| Auxiliary Contacts (2) 1-N.O./1-N.C. for remote monitoring of pump status | H |
| Motor Seal Failure Indicating Light (2) Amber Lens, door mounted – Option requires Moisture Detecting Relay | I |
| Moisture Detecting Relays (2) Relay Monitors a Seal Failure condition in the motor. Unless otherwise speci-fied, the standard design will not shut-down pump. | J |
Options for: Simplex Lift Station
| Description | Option Code |
|---|---|
| Dead-front Enclosure Construction Tamper-proof design with Swing-out inner door and Lockable outer door | A |
| NEMA/UL Type 4 Enclosure Steel, Water & Dust-Tight, Indoor/Outdoor use | B |
| NEMA/UL Type 4X Fiberglass-Reinforced Polyester, Water & Dust-Tight, Indoor/Outdoor use, Corrosion-Resistant | C |
| NEMA/UL Type 4X 304 Stainless Steel, Water & Dust-Tight, Indoor/Outdoor, Corrosion-Resistant | D |
| Anti-Condensation Cabinet Heater 100 Watt, Fan-Driven, with integral adjustable thermostat | E |
| Elapsed Hour Meter 99999.9 Hours, Non-Reset, door mounted | F |
| Pump Running Indicating Light Green Lens, door mounted | G |
| Auxiliary Contacts 1-N.O./1-N.C. for remote monitoring of pump status | H |
| Motor Seal Failure Indicating Light Amber Lens, door mounted – Option requires Moisture Detecting Relay | I |
| Moisture Detecting Relay Relay Monitors a Seal Failure condition in the motor. Unless otherwise speci-fied, the standard design will not shut-down pump. | J |
| Motor Over-Temperature Shutdown Terminal Block for thermal switch in motor. Motor shutdown with auto reset | K |
| Motor Over-Temperature Indicating Light Relay and Red Indicating Light, door mounted, auto reset | L |
| Time Delay Relay Solid State, Multi-Function (on-delay, off-delay, single-shot, recycling) | M |
| Phase & Voltage Monitor Protection against Low & High Voltage, Unbalance, Phase Loss & Reversal | N |
| Surge/Lightning Arrester | O |
| High Water Alarm Beacon Light NEMA type 4X, Top mounted, Red Beacon, Tamper-proof, Halogen Lamp | P |
| High Water Alarm Horn NEMA type 4X, Side mounted, 103dB @ 10 Ft., adjustable output, with silenc-ing pushbutton | Q |
| High Water Alarm Dry-Contact 1-N.O. Contact for remote monitoring of alarm status | R |
| Convenience Receptacle GFCI, 120V, 15 Amp, with weather-proof cover | S |
| Intrinsically Safe Relay: Interfaces with on/off floats Note: A separate ISR is required for High or Low Water Alarm | T |
| Auxiliary Control Relay | U |
| Push-to-Test Pilot Light | V |